GB 50387-2006冶金机械液压、润滑和气动设备工程安装验收规范(英文版)

所在位置：首页 > 图书详情

GB 50387-2006冶金机械液压、润滑和气动设备工程安装验收规范(英文版)

作者：中国冶金建设协会

ISBN：9787518203413

出版时间：2016年02月

出版社：中国计划出版社

关键词：冶金设备

分类：英文版规范

¥375

试读购买

阅读量：0 收藏

简介

本规范适用于冶金机械中液压设备、润滑设备、润滑脂润滑设备、油雾润滑设备、滑动轴承静压供油设备、工艺润滑设备以及气动传动设备安装工程质量的验收。本规范共8章和6个附录，主要内容包括：总则，基本规定，设备基础、地脚螺栓和垫板，设备和材料进场，设备安装，管道制作与安装，管道冲洗、吹扫和压力试验，调试和试运转等。

封面
书名页
版权页
Announcement of Ministry of Construetion of the People’s Republic of China
Foreword
目录
1　General Provisions
2　Basic Requirements
3　Equipment Foundation，Anchor Bolt and Shim
- 3.1　General Requirements
- 3.2　Equipment Foundation
- 3.3　Anchor Bolt
- 3.4　Shim
4　Equipment and Material Mobilization
- 4.1　General Requirements
- 4.2　Equipment
- 4.3　Raw Materials
5　Equipment Installation
- 5.1　General Requirements
- 5.2　Installation of Oil Tank
- 5.3　Installation of Cooler and Steam Heater
- 5.4　Installation of Filter
- 5.5　Installation of Accumulator
- 5.6　Installation of Pump
- 5.7　Installation of a Complete Set of Hydraulic（Lubrication）Station
- 5.8　Installation of Valve Stand for Hydraulic（Gas）Valve and Control Valve
- 5.9　Installation of Oil Purifier
- 5.10　Installation of Oil Filler and Distributor
- 5.11　Installation of Water-separating Gas Filter，Atomized Lubricator（Oil Separator）and Control Valve
6　Pipe Fabrication and Installation
- 6.1　General Requirements
- 6.2　Pipe Welding
- 6.3　Pipe Pickling
- 6.4　Pipe Fabrication
- 6.5　Pipe Installation
7　Pipe Flushing，Purging and Pressure test
- 7.1　General Requirements
- 7.2　Pipe Flushing
- 7.3　Pipe Purging
- 7.4　Pressure Test of Pipe for Hydraulic and Lubrication Oil Systems
- 7.5　Pressure Test of Pipe for Lubrication Grease System
- 7.6　Pressure Test of Pipe for Pneumatic System
8　Commissioning and Test Run
- 8.1　General Requirements
- 8.2　Commissioning and Test Run of Hydraulic Equipment
- 8.3　Commissioning and Test Run of Lubrication Oil Equipment
- 8.4　Commissioning and Test Run of Lubrication Grease Equipment
- 8.5　Commissioning and Test Run of Oil Mist Lubrication Equipment
- 8.6　Commissioning and Test Run of Process Lubrication Equipment
- 8.7　Commissioning and Test Run of Pneumatic Equipment
Appendix A　Record of Quality Acceptance of Subdivisional Works of Installation of Metallurgical Mechanical Hydraulic，Lubrication and Pneumatic Equipment
Appendix B　Record of Quality Acceptance of Sub-unit Works of Installation of Metallurgical Mechanical Hydraulic，Lubrication and Pneumatic Equipment
Appendix C　Record of Quality Acceptance of Unit Works of Installation of Metallurgical Mechanical Hydraulic，Lubrication and Pneumatic Equipment
Appendix D　Record of Commissioning and Test Run of Metallurgical Mechanical Hydraulic，Lubrication and Pneumatic Equipment
Appendix E　Record of No-load Combined Test Run of Metallurgical Mechanical Hydraulic，Lubrication and Pneumatic Equipment
Appendix F　Hydraulic Fluid Power-Fluids-Method for Coding the Level of Contamination by Solid Particles（from the national standard GB/T 14039-2002）
Explanation of Wording in This Code
Explanation of Provisions
1　General Provisions
2　Basic Requirements
3　Equipment Foundation，Anchor Bolt and Shim
- 3.1　General Requirements
- 3.2　Equipment Foundation
- 3.3　Anchor Bolt
4　Equipment and Material Mobilization
- 4.1　General Requirements
- 4.2　Equipment
- 4.3　Raw Materials
5　Equipment Installation
- 5.1　General Requirements
- 5.3　Installation of Cooler and Steam Heater
6　Pipe Fabrication and Installation
- 6.2　Pipe Welding
- 6.3　Pipe Pickling
- 6.4　Pipe Fabrication
- 6.5　Pipe Installation
7　Pipe Flushing，Purging and Pressure test
- 7.2　Pipe Flushing
- 7.5　Pressure Test of Pipe for Lubrication Grease System
- 7.6　Pressure Test of Pipe for Pneumatic System